Buying Strap Custom Cork Genuine Leather Handmade Italy Rolex Omega Panerai Custom Handmade Italy 16 18 20 22 24 26 mm

Cork strap. All sizes available.

HOW TO CHOOSE YOUR STRAP:

To find the best strap for your watch and wrist, you must first know the different lengths and sizes available. The width of the strap is always measured in millimeters (mm).

1) WIDTH OF THE LOOP
To know the width of the pin measure the distance between the two lugs, the protruding ends at the top and bottom of the watch to which the strap is attached.

2)STRAP LENGTH
Measure the length of both straps excluding the buckle. If your current strap is of adequate length consider the same length.

3)BUCKLE SIZE
If you want the buckle compare the size of your buckle with that present in the descriptions of our products and choose the model among those we offer.

4)TYPE OF SEAM
Customize your strap by choosing the type of seam and the color of the thread used to achieve an elegant and refined style or more pop and contemporary

IF YOU HAVE DIFFICULTY WITH THE MEASUREMENTS, ENTER IN THE CUSTOMIZATION ITEM THE DIAMETER OF YOUR WRIST, WE WILL TAKE CARE OF MAKING THE CORRECT MEASUREMENT.


WHY CHOOSE THE CORK STRAP:

Straps made with an Italian cowhide buying shoulder base covered with cork of Portuguese origin, made very flexible and resistant to tension by a thin layer of fabric contained inside. The strap is completely water resistant, so you can wet it in both fresh and salt water.

The leather, of the highest quality, is strictly Italian and to be precise comes from one of the oldest and best Florentine tanneries.

The seam is then carried out strictly by hand, through a double-pointed compass, to mark the distance that the thread must have from the edge, then through a special lacing fork, the strap is pierced one point at a time and then sewn by hand with a single thread passed with the double needle technique.

ITEM DESCRIPTION:

The main feature of this material is high water resistance. Ideal for those who use the watch while diving.

The construction method for these straps involves the use of two loops, the first near the buckle is fixed, that is, sewn inside the strap itself, while the second loop is mobile and therefore free to slide along the length of the strap.

The thickness of the strap is uniform for both pieces and is about 3.5 mm for the wider Panerai models and 2.8-3 mm for the narrower models such as Rolex and the like.

Shark skin, particularly valuable in the Japanese version, is known to be among the most abrasive on the market for the presence of tiny denticles along the entire surface.

Once used to smooth and grind today, thanks to modern tanning and the help of oils applied on the finest parts, which make it particularly soft, it is used for the production of small precious leather goods and jackets.

The most common coloring is black. Very pleasant results in the brown and gray variants that highlight the original pattern. Over time it tends to age giving a vintage effect to the object brought.

Some colors are in limited edition, also due to the severe limitations.

PERSONALIZATION:

We offer a wide range of customization. Once you have chosen the Ansa-Buckle width and the Seam Color, you can also decide on the length of the pieces, the type of Buckle and the Seam Style. No surcharge will be applied. These last three settings you will have to enter them in the CUSTOMIZATION box.

BEFORE SHIPPING WE WILL SEND YOU THE PHOTOS OF THE ITEM.

For any questions do not hesitate to send us a message, our Customer Service is always at hand to give you assistance.


REALIZATION TIMES:

Our items being handmade, take 3 to 5 working days before being shipped.

EXPEDITION:

Express Courier Bartolini.

- ITALY: 24h. Islands (Sicily, Sardinia and Corsica) 48h.

Poste Italiane International Registered Mail.

- USA: 10-15 working days
- Canada: 10-15 working days
- Australia: 30-35 working days
- Europe: 8-10 working days
- Rest of the world: 15-20 working days