This is a 3D Printed parts kit of Ciri's Sword from The Witcher 3 and is made to order (SWORD ONLY). Color may buying vary depending on what plastic I have on hand as it is assumed you will be painting the assembled product.
Printed with ABS plastic.
Size: ~43 inches long.
Metal Parts:
13" long 1/4" rod.
Two 20" long 1/8" rods.
Two 2" long 1/8" rods.
Parts can be glued together with super glue or epoxy.
This product can take ~1-2 week to prepare (3D print), depending on how many other orders I am currently processing. On average it takes ~1 week.
I also run the parts through an acetone vapor bath to melt the print lines and make the parts smooth. This vastly cuts down on the amount of sanding needed by 75% or more. This does NOT mean that no sanding is required. I do recommend a light sanding with a high grit sand paper (220+) before priming to give the paint better adhesion.
Product code: Ciri's buying Sword - Witcher 3 - 3D Printed Parts kit (Sword Only)