Dice Jail - buying Large custom 3D Resin Printed (Personalized)

This dice jail was created by gamers for gamers! One of my previous customers reached out buying with an idea for a custom dice jail, he shared some design ideas where other models lack and what he imagined, and I went to work. Oversized and built with a wood pillar core, this jail is made to house all those nasty dice when they get out of line, even the big ones! With a personalized plate to make your jail unique. The main design has a worn cobblestone appearance with weathered metallic bars and name plate. A pine trim line around the plates is given a worn appearance. The best part of this design is you can contact me and let me know colors, and plates. For example, perhaps you don't want cobble stone. I can swap it out for wood or brick appearance.

Print was created using a mixture of Siraya Tech ABS-like resin with Siraya Tech Tenacious impact resistant resin for a stronger finished product. This mixture removes the brittleness that is common in resin prints and miniatures while giving it some mild elasticity. Item is printed to order, washed with Isopropyl Alcohol to remove any uncured resin and then cured fully using a curing station. Rust oleum 2x paint plus primer in a flat black is the base color. Detailing is done using a variety of multi-surface acrylics, metallic Rust oleum, followed by a black wash and then a few coats of semi-gloss clear coat to protect the paint.

-- Measurements --
Base = 6.5 in. x 6.5 in.
Height 6 = in. Tall
Roof = 5.5 in. x 5.5 in
Opening = 3 1/8 in. by 3 1/8 in.
Name plate = 3.5 inches long by 5/8 in. tall
Between Bars = 7/16 in.