White Oak wood veneer 25" buying x 35" with peel and stick adhesive PSA backer 3M

$64.36
#SN.015121
White Oak wood veneer 25" buying x 35" with peel and stick adhesive PSA backer 3M,

White Oak wood veneer 25" x 35" with peel and stick pressure.

Black/White
  • Eclipse/Grove
  • Chalk/Grove
  • Black/White
  • Magnet Fossil
12
  • 8
  • 8.5
  • 9
  • 9.5
  • 10
  • 10.5
  • 11
  • 11.5
  • 12
  • 12.5
  • 13
Add to cart
Product code: White Oak wood veneer 25" buying x 35" with peel and stick adhesive PSA backer 3M

White Oak wood veneer 25" x 35" with peel and stick pressure sensitive self adhesive x 1/40" thickness A grade quality. The adhesive is already on the product and you simply trim to size and peel off the protective liner and apply to a clean smooth surface and trim with a utility knife or similar. There is a paper backer also on the product to hold it together and make it flexible. One piece as pictured. Other sizes, backers, raw veneer and edgebanding are available. Grain runs longer direction.

No need for messy, smelly expensive contact cement. Simple to use with complete and simple but detailed instructions included.

Trust the experience, knowledge, and reputation that has served the wood industry buying and novices since 1995.

Other sizes, backers, and unbacked veneer may be available.

About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness: Paper-backed veneers are generally 1/40 and wood-backed veneers are 1/25. Raw plain veneer with no backing is about 1/32-1/42.

How to cut: generally cut with a razor knife or similar tools and some type of straight edge.

How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.

How to finish: most any conventional finishing products can be used with veneer that is applied correctly.

Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldnt impact overall quality or satisfaction. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.


SKU:mx1_112080420336_dd74c08*

.
360 review

4.95 stars based on 360 reviews