A transparent silicone mould for jewellery DIY, MULTI Cavities, 25 pieces (sphere buying 9 mm)

A transparent silicone mould for jewellery DIY, MULTI CAVITIES, 25 pieces (sphere 9mm)

One form - 25 pieces a sphere 9 mm diameter.

A polyurethane cast was made to evaluate and check the surface quality of the mold which you are purchasing . It was made to evaluate and check the surface quality of the mould.
The photo presents some exemplary spheres just after removing from the mould, without any additional polishing treatment. The high quality surface of the spheres results from the mould itself.

You can see buying if you have some air bubble inside the mold or if your embedding object is in the right direction .

Other sizes and shapes of the moulds are available on request, e.g. rolls, bracelets etc.The moulds can be shaped to reproduce customer's models.

**********************************************************************************
What makes our products unique?

• Our moulds are made to order.
It is why you can be sure that your mould was NOT kept on store for a long time and was NOT exposed to unfavourable conditions which shorten its durability.
What you get is the mould tailor-made for you.

• we only use high quality silicone to manufacture our moulds

• we make the molds giving highest attention to technical details which facilitate the casting process.

•they are suitable for casting epoxy resins, polyurethanes, polyesters, concrete or wax

•The mould is designed to be used several times. No releasing agents are required.
You can use mould release which may extend the life of your mould, but you must consider lower quality of cast surface in this case.

•we make our models/masters with great care for details so that to achieve the highest quality of the surface
•poliurethane and epoxy casts do not need polishing, the surface is smooth and shining
•YOU WILL NEVER FIND AIR BUBBLES INSIDE THE WALLS OF OUR MOULDS
We are fully aware that the pockets of entrapped air lower the mould durability, cause problems in the casting operation, and generally deteriorate the quality of the product.
•we always attach a sample poliurethane cast to each mould, to evaluate the surface
•The overall manufacturing time is 3-5 days (as declared in each offer), in some cases 1-2 weeks.
•After purchase , via e-mail, will be sent instructions: "how to use the moulds", and "how to make a flower in a resin sphere”
•our moulds are manufactured to meet the customer's needs, to the specification of a dimension design
•if one is interested in other size/dimension – please contact us
•we have always time for our customers, if you have a problem of any kind, don't hesitate to contact us, we will do our best to help you

**********************************************************************************