Mandalorian Pack 3 buying for Beskar Armor Set 3D Files 3D Print File For Printing Costume Prop Cosplay

***Please note! These are Digital Files for 3D Printing these parts! NO PHYSICAL ITEMS IN THIS LISTING***

This is Pack 3 of the beskar armor 3D Models inspired by Mandalorian Armor, this pack is about 15% less than buying them all individually from me.

If you need to find someone to print this for you, I recommend 3D Hubs

****I could only fit a few pictures so if you are curious about more specifics of each item, there are individual listings for each in my shop.****

I did my best to look at every detail of these pieces when modeling to get them as close as i possibly could to the original. There have been different versions through this process. Should you buy, message me and i will share a google drive folder with you so you can get any updates if there are any.

These files should be scaled fairly close to actual size, but you should always check the measurements before you print or send them off to a printer.

Here is what you are getting in this set:

Beskar Chest Plates (Multiple pieces)
Whistling Birds Wrist Gauntlet (Left Side, Multiple Pieces
Flame Thrower Gauntlet (Right Side, Multiple Pieces)
Hip Armor
Beskar Shoulder Armor
Beskar Thigh Armor (Two pieces)
Shin Armor (Multiple Pieces)
Back of Hand Armor
Butt Plate
Back Plate

–––––––––––––––––––––––––––––
Details of Gauntlets
–––––––––––––––––––––––––––––
Main File for Whistling Birds
2 top pieces, one flat and one with the extra pieces
separate extra top pieces
separate side piece for the left side of the gauntlet
wrist rocket with and without whistling birds
button cover
buttons.
With the way that i set up the buttons, there is space underneath to add a spring of some sort so you can actually press the buttons (sort of) if you were to use flexible filament for the buttons, they would work even better.

Main File for Flamethrower
One top piece with flat top
One bottom piece (will need to be printed with 0 degree angle support or it will fall off the bed/droop)
Top piece with open cavity for electronics in the back (This may be adjusted in the future to match the photo better)
Window for a screen
Front tip for the top piece
Side piece
Two Flame thrower parts (Shorter one needs to be printed twice.)


Second Version (Both Gauntlets)
The third picture shows one that is shortened and has an adjusted rocket to match the photo better. Both gauntlets include 2 versions, a longer version and a shorter version which match the photo proportions better. Your choice on which to print.


–––––––––––––––––––––––––––––––
Shin Armor
–––––––––––––––––––––––––––––––
He only wears one of these so you only need to print one for your right leg. It's quite large so you'll probably need to cut these up into smaller pieces.

Files include:
Left shin piece
Right shin piece (mirrored from left)
Long front piece
Top knee piece

––––––––––––––––––––––––––––––
Chest Details
––––––––––––––––––––––––––––––
Upper Chest
Center Dot
Center "Y"
Middle Filler
Lower Panel

If you have any questions, let me know!

Please do not give out or distribute buying the files. This includes mold making.